Disposal does not run |
| Cause |
Solution |
Power not
reaching disposal
Circuit breaker or overload protector tripped |
Check fuse or
circuit breaker.
Push reset button or let motor cool. |
Leaks at the sink flange |
| Cause |
Solution |
Loose mounting
Defective gasket |
Tighten nuts.
Replace gasket |
Leak from weep hole |
| Cause |
Solution |
| Seal is unseated
or worn |
Replace seal. |
Slow grinding |
| Cause |
Solution |
Un-disposable
matter in hopper
Damaged impeller
Dull cutting edges
Insufficient water flow |
Remove matter.
Replace turntable.
Replace grind ring.
Open faucet fully. |
|
Disposal jammed |
| Cause |
Solution |
| Object stuck
between impeller and grind ring |
Manually move
impeller backward to free debris. |
|
Excessive noise or vibration |
| Cause |
Solution |
Un-disposable
matter
Broken impeller
Damaged motor bearings |
Remove clogged
matter.
Replace turntable
Repair or replace disposer unit. |
